Methodology Used in Water Leak Detection

Posted by articlelink01 on June 28th, 2014

Water leak in a pipeline usually serves the whole building, aside from signifying financial loss, it can also lead to low water pressure within the water system, and it can be very annoying and damaging to the boilers, washing machines and other equipment that you may have at home.

1. Detecting water leak through radar
   
   

This is very efficient especially for outdoor environment and plumbing companies Austin will use it when the problems call for it. Radar detection is more accurate in finding the leak as to where it all started. It also helps in providing more data about the leak size and possible damages too. Through the use of radar waves that travel through the pipes and other materials, some parts of the wave may hit the material that can also be taken by the device. It can help by computing the return of time and the strength and through analyzing the material that the wave hit though.

1. Gas filling

This method can also help in detecting water leak especially for indoor concerns that you may have. This method of detecting water leak can be of help in properly tracing where the pipes are located. The process is so simple whereas the use of gas which is often in an industrial hydrogen form is inserted through the pipeline and then the track of the pipe will be thoroughly inspected but with the use of certain devices meant to check the sensitivity of the pipe with the type of gas inserted. Since the gas is being pumped using high pressure, if there is a leak, the detector will surely identify it and will tell you where the leak is coming from with the help of the gas. This method can also be used in an outdoor environment, provided you have to do some digging to be able to reach the pipeline. The accuracy of the detection of leaks may depend on how deep the pipeline is, but plumbing companies Austin know the range.

1. The Use of Geophones

Geophones are devices used similar to stethoscopes seen on doctors. They share the same principle though. Both devices can hook sounds so you can easily recognize some leaks by just listening to the ground. Every leak no matter how big or small they may be can make people detect the leak easily. The irony is that, the bigger the leaks, the harder it is for the people to detect them using geophones because in a big leak, the water may pour noiselessly while in a smaller leak in a high pressurized pump, there is a lot of noise there that you can easily hear even without the device.

Detection of leaks is performed by commercial plumbing contractors. Finding leaks may be very hard but it is so important to make sure that the areas will be protected accordingly and the problems will be adequately diagnosed as well. You can save a lot of money in paying for your water bill as soon as the problem about leaks has been determined by commercial plumbing contractors.

 There are different methods in detecting leaks and plumbing companies Austin - http://austenplumbing.com/plumbing-services.html   has all the methods needed to get the job done easily. commercial plumbing contractors are well equipped with the skills to help you out in solving the problem.