Electric gates Hampshire: Few common types

Posted by SharonEvans on December 5th, 2014

Automatic or electric gates acts as entrances to the facility and control vehicular access on and off the site. Unlike the commonly held belief that these gates find a place at the exteriors only, they are equally useful in interiors as well. Electric gates Hampshire consists of two basic components- the gate that can be either of an ornamental make or chain-link material and the gate operator that moves the gate in and out of the gate opening. You can find your preferred gate in any of the reputed electric gates Bournemouth units or in any common place in the UK. However, do not get confused with the variety and try to choose the one that best suits your needs and pocket.

For those who wish to install electric gates Hampshire must always know about the popular gates that are available in the market. Though most residential units prefer the swing ones, there are other options to choose from as well.

Articulated gates

For gates having wide posts and allowing opening in small spaces, articulated gates and openers suit well. Its advantage lies in its simplicity in installation but the only drawback is that aesthetically it is a huge turn-off. Often called the Crank arm operator, this form of automation system was used in few countries only, where low aluminium gates formed the majority.

Slide gates

One of the most commonly used electric gates is the slide gate that is mounted parallel to the interiors of the fence and slides in a horizontal fashion back and forth across the gate opening. With slide gates, rollers are attached at the bottom for providing support. Since they ride along a metal track, these gates are often called the ‘rolling gates’ or ‘V-track gates’. Most commonly used in commercial settings, sliding gates are often used in cantilever gate systems.

Cantilever gates

Similar to slide gates, the cantilever gates are mostly supported from rails that run along the inside of the fence structure. Also, these types of electric gates Hampshire are much wider in comparison to their sliding counterparts for providing a section along the fence structure where the gate is supported. Since these gates are suspended across the gate opening from the counterbalance and have no rollers running along the ground, these gates are much more reliable than slide gates. It is owing to this that these gates are considered suitable for heavy-duty and industrial gate applications.

Though there are a number of gates as these, yet the common and frequently used ones have been mentioned above. However, one does not need to restrict oneself in choosing among those types only. Whether you choose electric gates Bournemouth or Hampshire, you must always remember to connect the motor to a nearby electrical outlet as these gates are futile without any source of electricity. Few battery-operated ones are also equipped with solar panels to recharge the system during daylight hours. That means, these gates will offer you much value during power outages as well.

Interested in getting Electric Gates Hampshire? We are one of the main suppliers of Electric Gates Bournemouth and also provide the necessary services as installation, repair and maintenance of these products.