Pure music with REW software and USB to I2S

Posted by juanoliv3 on June 9th, 2015

When you are in love with music, you cannot stand anything but perfection. There are many who invest in the most expensive music systems and yet they are not able to experience the kind of flawless music that they would expect. But it is not the music system that you can blame if you face a similar situation. The actual reason could be different. The good news for you is that there are simple solutions to these issues. A REW software application or an USB to I2S could resolve your issue and let you enjoy pure and unadulterated music.

There are traditional ways to make music pure but you will find that the expense is sometimes too much to handle. There are expensive accessories that you can invest in and it is highly likely that the results will come your way. But are you prepared to spend so much given the fact that there are other, less expensive options available to you? The REW software application or an USB to I2S can easily resolve your issues. In REW all you have to do is to take the initial measurement, calculate the required correction filters in REQ, then load it to the interface provided by miniDSP and follow the detailed instructions provided by the vendor.

The REW software application allows you to figure out how the acoustics of a room are. You would typically use this software in the room where your music system is present. Once you let the software get going, it will do its calculations and generate data. The data will tell you where the acoustics in the rooms are the worst. Once you have this data you can decide where to place your subwoofers. It is possible that you may need to place the subwoofers in different parts of the room till you get the right music. But at least you will have an idea with the REW software application.

I2S, also known as Inter-IC Sound is a serial bus that is designed for various digital audio devices that include the USB. The USB to I2S design is able to separate audio data from clock signals. As a result, any time-related errors are eliminated and you don't experiences those jitters when you listen to music on your system. Normally, you would want to buy one of the anti-jitter devices for this purpose, but with this feature, there is no need. Typically, there are three design elements in I2S and they include data channels, a clock line and a word select line. Setting up USB to I2S is simple and you can do it easily provided you have the right support.

Both the REW software application and an USB to I2S allow you to experience music the way it should be. These can be obtained for a very low cost and you can purchase online. It is important to evaluate the vendor so that you get what you pay for. Look for someone who doesn’t just sell, but also provides support when you need it. This is an important element to consider.

Music can become completely unadulterated when you use the right software and hardware. Consider using a REW software application or anUSB to I2S for this purpose.