Alpha Kaolin Project, Suraj Minerals, Bhuj Gujrat

Posted by cdeasia on December 14th, 2021

Suraj Minerals installed a CDE Micrograder BT plant for their Alpha Kaolin project in Bhuj, Gujrat which helped them maximize the recovery of China Clay and increase its production 5-fold

CDE Asia recently installed a MicroGrader BT Processing Plant for the Alpha Kaolin project of Suraj Minerals in Bhuj, which helped them maximize the recovery of China Clay and increase its production 5-fold. The newly commissioned plant also helped them produce high quality glass grade silica sand which opened up the doors to some of the biggest glass manufacturers in the state.

The pain points of Alpha Kaolin

Suraj Minerals is one of the leading manufacturers and suppliers of Levigated, Crude and Powdered China Clay having 10 mines spread over 100 hectares in Bhuj, Gujarat. Ever since their inception in 1984, they had been using conventional methods to process the mined clay which was very time consuming, labour intensive and inefficient. They would put the crude clay mixed with silica sand in blengars and mix it with water to make slurry. The slurry would then be passed through screw classifiers which would separate the clay and sand. The inefficient separation was resulting in a loss of 3-5% of valuable clay which got mixed with silica sand, also damaging the quality of silica sand.

There was a pressing need for an efficient solution which would enable them to ramp up production of china clay and also produce high quality glass grade silica sand from a single plant.

The one-stop scientific solution by CDE Asia

Alpha Kaolin sent in their clay samples to the CDE lab for inspection. Based on the encouraging test results on the samples, our tech team recommended the installation of MicroGrader BT with Spiral (for heavy minerals separation) and Nano-Wash (for clay separation of 45 micron).

The equipment was finally commissioned in Feb 2021 which helped them unlock the potential of their raw material and turn in unprecedented profits for Suraj Minerals.

Before CDE Asia

 After CDE Asia

Slow & inefficient process

     Fast & efficient process

16 tons of clay produced/day

    80-90 tons of clay produced/day

3-5% of valuable clay lost in the process

   Only .5% of valuable clay lost in the process

Low quality Silica sand (often mixed with clay) Sold for Rs 200-230/ton

   High-quality glass grade Silica sand produced Sold for Rs    550-700/ton

Silica Sand being sold to Silica sand processors or to small-scale glass industries

  Silica Sand being sold to the largest glass manufacturers in Gujarat and Kolkata(Saint-Gobain Glass, HNG, Gujarat Guardians, Gujarat glass, Piramal Glass)

Unreliable equipment resulting in frequent breakdowns and increased downtime.

    Reputed brand with minimal breakdown and downtime.

Labour intensive process needing a lot of manpower

  Fully automated process, needing minimal manpower

Huge amounts of water wasted

  Up to 95% water recycled back into the system

High power consumption

  Low power consumption

A lot of space needed for additional plant setup

    Compact plant with effective space utilisation

: With this successful installation of the CDE Asia equipment, Suraj Chemicals has seen a 5-fold jump in their China clay production and is now one of the leading manufacturers and suppliers in the region. The have also been able to successfully manufacture glass grade silica sand from the same feed and fetch a much higher rate per ton for the entire production. It is indeed gratifying to see the transformation brought about by this installation.

For more information on how CDE technology can transform your Silica Sand and China Clay production, get in touch with us.

 

Like it? Share it!


cdeasia

About the Author

cdeasia
Joined: April 13th, 2021
Articles Posted: 15

More by this author