Reasons to Consider an MPPT Solar Charge Controller in Arizona and California

Posted by Tom Duffy on September 14th, 2022

Environmental experts have endorsed using an alternative energy source for decades. Well, it is not too hard to install a solar power system, but the user has to remain focused on keeping it operational no matter what. This brings one to the topic of using a charge controller. It is not an option as most decent-sized batteries with a good output should have a reliable controller attached to them too. It suffices to learn that a superior product such as the MPPT solar charge controller in Arizona and California can prevent overcharging the battery. This becomes possible as the solar panels are turned off after the sun is down, thereby preventing a reversal of the energy to flow in the opposite direction.

The MPPT controller is by far the most popular product today. Short for “Maximum Power Point Tracking!” Apart from preventing the backward flow of power, this controller also increases the charging current of the concerned system. A 10-amp power flowing from the solar system into the controller is enhanced to 12-amps when it flows into the battery via the controller. The controller is in no way responsible for generating power, however.

Almost all charger controllers add to the life of a battery. The early models consisted of a single relay that allowed the solar panels to charge the battery continuously.

The current advanced models can bulk charge a battery by converting almost 80% of the power. The numbers differ with the brand used, though. It is essential to invest in a charge controller that comes with a pre-programmed setting for the voltage. The charger is sure to pass on to the absorb mode, and the timer is neutralized once again.

Sadly, not all charge controllers are capable of being programmed. Using such a controller will be cost-prohibitive as the battery is drained of charge when the power flows in the reverse direction. This affects battery health adversely and does not ensure a long life. Replacing the controller frequently is not the best way to utilize solar power perfectly.

MPPT charger controllers are in high demand for it offers multiple advantages to the end user. The users are excited to learn that this particular charger controller will be able to utilize the available power fully i.e. 100%. It is interesting to note that the available power is extracted from the concerned module to ideally condition the voltage and the amperage.

•  The best MPPT products handle more voltage than the battery
•  One can increase the voltage appreciably by series connecting several modules.

While the MPPT charger controller does not come cheap, it is essential to remember that the expense is justified as the costs of modules, wiring, and racking are almost nonexistent.

It is advisable to invest in a superior FLEXmax charge controller in Arizona and California that has emerged as the most suitable and cost-effective product to date. Maximum Power Point Tracking (MPPT) is an innovative and efficient product that ensures high performance.