Which is good for the busbar machine?

Posted by bruce zhu on September 17th, 2023

When using the busbar machine for processing work, the first thing that needs to be guaranteed is safety. It must be processed in a safe state that the basic interests of the manufacturer must be guaranteed. This requires everyone to ensure that the selected equipment meets the requirements of good security. Although the manufacturer does not affect the normal use of the equipment when it does not affect the normal use of the equipment, the real safe use also needs to be grasped by the operator themselves. The correct method of use of the equipment has a close relationship with the safety of workers, which requires operators to be careful during use.

If there is no power indicator light, the solenoid valve coil does not need to distinguish the polarity (not like a transistor with a barrier of the coil voltage as DC, and the coil voltage with diode/resistance leakage circuit on the coil is the intermediate relay with DC <This intermediate relay. Most of the original small Japanese> need to distinguish poles). Which is the best of the busbar machine?

With the hardware configuration that meets the requirements, there is also a need for the coordination of the winding process. There is a big difference between multiple shares and winding and single -line entanglement in the process. The lacquer bag protection measures should be added at the exchange line. The angle of the exchange line should not be too large to avoid damage to the wire.

Because the copper row processing machine can be operated by multiple people, a special person must be responsible for command production. You must select the cut blade of the cutting blade and the gap between the type and the bending corner radius according to the thickness of the copper row.

Which of the busbar machine row is to observe and listen carefully, and stop the smell immediately when smelling. Observe whether the motor is vibrating, noise and abnormal odor. During the operation of the bus machining motor, especially the high -power motor, it is necessary to check whether the ground bolt, the motor end cover, the bearing cover, etc. are loose, and whether the grounding device is reliable. If the vibration of the motor is found, the noise increases and the odor occurs, and the driver must be stopped as soon as possible to find out the cause of the cause of the cause.

Of course, in addition to the above aspects, the portable bus processor also has more characteristics in the process of use. It is hoped that users can better use it and then bring greater benefits to users.

Lubrication is an important task for reducing mechanical failure of the parent processing machine. After the lubrication work is done, we can better use the mother arrangement machine. Let ’s take a look at what are the lubrication work of the parent processing machine? Which is better

The reason for the noise of iron heart is that under the influence of the cross -magnetic field, the size of the silicon steel sheet will change slightly. Because the changing cycle of magnetic telescopic is half the cycle of the power supply frequency, the vibration of the transformer body caused by magnetic telescopic is used as the base frequency of twice the power supply. Therefore Caused by telescopic characteristics. The size of the magnetic telescopic rate is related to the material of the silicon steel sheet.