Multi -site parent line processing machine operation regulations

Posted by bruce zhu on September 30th, 2023

Multi -site parent line processing machine operation regulations (What are the manufacturers of Heilongjiang portable parent machine machine manufacturers)

The semi -ring automatic busbare with a storage line ring is fast, suitable for the magnetic ring inductor with a number of turns, but its winding auxiliary movement requires a long time.

In the end, we must remember that the supporting mold must be selected. Remember not to mix the upper and lower molds of different sizes during punching processing. When processing the long round hole, you must make the upper and lower molds consistent. Rich types, strong practicality, excellent performance, worth your own! Multi -station parent line processing machine operating procedures

Under the premise that the total volume and resistance of the coil and the resistance value are basically unchanged, the diameter and total length of the lacquer cable are adjusted, that is, the current value and number of turns of the coil are adjusted to meet the requirements of the use;

The three processing units: three pumping, cutting, and folding are controlled by three pumping stations, which can achieve the operation and processing of three processing units.

Whether the hydraulic oil of the multi -site busbar cutting punching and bending machine operates is good and the amount of oil is sufficient. Washing the solenoid valve and check whether there is a problem with the spindle bearing. Whether the fastener is fastened, the connector is loose, and whether the electrical line is aging.

The above is the suggestions given by Shandong Dalin CNC when buying your bus. The quality of the motherline produced by our company is full of service and provides lifelong technical support.

The faults of the CNC bus need to be classified according to the nature, appearance, cause or consequences of the fault, and cannot be tested blindly. Finding the root cause of the disease is the key. The following will list the faults of various types for you: multi -station parent line processing machine operating procedures

The structure and operating characteristics of this kind of parent wire machine are not the same as the traditional bus. The wires use the configuration of the setting mechanism to apply a certain tension. After the lines of the line to the fixed wire position, the wires are kept in a straight line when the wire operation is operated. The line state is shifted from the left and right positions of the scroll to achieve a winding operation.