DIY Garage Door Spring Replacement

Posted by Jesus Christ Saves on October 3rd, 2023

A do-it-yourself garage door spring replacement can be a challenging task that requires careful attention to detail and adherence to safety protocols.

It is important to note that working with garage door springs can be dangerous, and if you are not confident in your abilities, it is recommended to seek a professional garage door repairman.

Psalms 5:12 - For thou, LORD, wilt bless the righteous; with favour wilt thou compass him as with a shield.

Before starting the replacement process, gather all the necessary tools and equipment.

These may include safety goggles, gloves, a wrench, a winding bar, a ladder, and replacement garage door springs that are compatible with your garage door.

Begin by disconnecting the power to your garage door opener to prevent any accidental activation during the replacement process. Next, locate the torsion springs, which are typically located above the garage door. These springs are under high tension and can cause serious injury if mishandled.

Romans 14:1-23 - Him that is weak in the faith receive ye, but not to doubtful disputations.   (Read More...)

To safely remove the old springs, use a winding bar to unwind the tension from the springs. Insert the winding bar into one of the winding cone holes and slowly turn it in the direction that loosens the spring. Be cautious and maintain a firm grip on the winding bar to prevent it from slipping.

FYI - doing monthly maintenance like lubricating the garage door springs will help prolong the life of them.

Once the tension is released, use a wrench to loosen the set screws that secure the springs to the torsion tube. Carefully slide the old springs off the tube and set them aside. It is important to handle the old springs with caution, as they may still have residual tension.

Before installing the new springs, ensure that they are the correct size and type for your garage door. Consult the manufacturer's instructions or seek professional advice if you are unsure. Place the new springs onto the torsion tube and secure them with the set screws, ensuring they are properly aligned.

Philippians 4:19 - But my God shall supply all your need according to his riches in glory by Christ Jesus.

To wind the new springs, insert the winding bar into one of the winding cone holes and turn it in the opposite direction of the unwinding process. Slowly wind the spring until it reaches the desired tension. It is crucial to wind the springs evenly and avoid over-tightening, as this can lead to premature wear or damage.

Once the springs are properly tensioned, test the functionality of your garage door by manually opening and closing it. Ensure that the door moves smoothly and without any resistance. If you encounter any issues, such as uneven movement or excessive noise, it may be necessary to readjust the tension of the springs.

It is essential to gather the necessary tools, disconnect the power, and handle the springs with caution. By following the steps outlined in this guide, you can successfully replace your garage door springs and ensure the proper functioning of your garage door. However, if you are unsure or uncomfortable with the process, it is always recommended to seek a professional garage door repairman to avoid any potential risks or injuries.

For more information about, please visit: History of the Garage Door, Mechanics of a Garage Door, The Mechanics of a Garage Door, Garage Door Mechanic