Tips for opening and repairing a Bosch vacuum cleaner

Posted by digi on January 2nd, 2024

A vacuum cleaner, like any other device, may lose performance over time. In many cases, this performance drop is due to the penetration of a large volume of pollutants and foreign particles. One of the well-known brands in the field of vacuum cleaners is Bosch. Bosch vacuum cleaner repair is a specialized matter. So, to repair this device, you have to act professionally step by step. In this article, we are going to talk about Bosch repair, from opening the vacuum cleaner to fixing its defects. So stay with us to help you improve the performance of this device.

Opening the Bosch vacuum cleaner

Before any technical work on the vacuum cleaner, you must unplug the device. With this, the possibility of electric shock is zero. Then take the following steps to open the device door:

Check how the device opens and closes.
Then proceed to open the frame.
Open the duct by pulling out the vacuum cleaner bag.
It is time to lift the intake air filter above the engine.
How to open the vacuum cleaner motor?

The motor of any electrical device can be considered as its beating heart. To open the vacuum cleaner motor, you must do the following:

Place the vacuum cleaner facing you so that the back part is facing you.
Then, using a screwdriver, open the screws of the engine cover.
It is better to draw a view of the connections of the device before removing the part. This will help you avoid problems during reassembly.
Solving the problem of reducing the suction power of the vacuum cleaner

A vacuum cleaner is used to pull in pollutants and foreign particles. But the decrease in the suction power of this device makes cleaning the house a challenge. If your vacuum cleaner has lost power, you can take the following steps to solve the problem:

Cleaning the vacuum cleaner filter: A layer of dust prevents the passage of air. For this reason, if you haven't cleaned the filter in a long time, know that the reduction of suction power is possible.
Check the condition of the brush bar: These bars are used to agitate the carpet better and more. Check that this structure is not stuck or tangled.
Clogging of the vacuum tube: sometimes this tube is blocked with large debris such as hair and fluff, and this causes the power of the device to decrease.