A Non-destructive Inspection ServicesPosted by DIGITAL THERMAL POWER on December 25th, 2019 Thermography inspection is a non-destructive or non-invasive inspection and measurement technique to which temperature on any surface is measured. The inspection process takes place uses infrared devices that measure emitted infrared radiation from the instrument or any surface. It is used to detect thermal anomalies that may indicate potential damage to a structure in place, and it shall identify a vast range of problems in the building. Accurate diagnosis of a thermography inspection from a trained professional should identify energy loss, airflow, air leakage, moisture levels, insulation defects and the building envelope, electrical connection anomalies: Electrical Inspection - The electrical panel that has an undersized breaker and other deficiencies that can be detected using infrared thermography.Mechanical Inspection -Thermography for a mechanical system, or an infrared survey, provides the entire health status of the scheme.Building Envelope Inspection - Building inspection using infrared thermography inspection is presently the most efficient way to scrutinize every aspect that needs to be maintained.Solar PV Inspection - Find defective cell today using our innovative solution by thermography and IV Curve Testing.Gas Leak Detection - The FLIR Optical imaging Thermal Camera detects hydrocarbon and volatile organic compound (VOC) emissions from natural gas production and use.Call: 800-8437625 (THERMAL) https://digitalthermal.com/services/ #thermography #thermographyinspection #leakdetection #waterleakdetection #mechanicalinspection #buildingenvelope #solarpv #solarpvinspection #electricalinspection #gasleak #gasleakdetection Like it? Share it!More by this author |