Steps With Paving Blocks How To Cover The Floor

Posted by basshopper on February 2nd, 2020

Concrete block flooring Is another material that house owners prefer to use for flooring outside the house. With features that look strong, easy to install, have various styles and colors. Can still play many different patterns, but when used Sometimes the floor collapses causing the floor blocks to collapse along, so the arrangement is uneven. Which does not look beautiful or is a pothole when it rains. Home-owners have to turn to the causes and solutions to get the flooring back to be smooth as before.

The reason why the floor blocks are quickly collapsing In general, it is associated with installation. Especially the compacting of the soil under the block that is not tight enough to cause the ground to collapse easily Or did not make the edge of the barrier around the area that paved the block Causing the weight and force during use to push the blocks and sand to flow out of the original position, so if the home-owner wants to slow down the collapse of the paving blocks Should be installed correctly and completely according to the steps in the manual By focusing on compacting the soil as tightly as possible. Including making the edge of the stone to prevent blocks or sand from flowing out to the side.

As for the laying of flooring blocks, there are the following
Explore the area
Survey the area that needs flooring to be used for what kind of work. How much weight does it have to be? Such as garage flooring Which has to bear quite a lot of weight Including the site area whether a compactor can be brought in or not Or must use soil compactor etc.

Mobile crushers can be found in a diverse range of businesses, including quarrying, ore-processing and recycling of demolition waste. This guidance is for those with responsibilities for the performance of cellular crushers, including supervisory personnel contract supervisors and operators of all the devices. It covers the safe functioning of this mobile blasting functioning and includes guidance on clearing obstructed jaw crusher wear parts.

Choose the block type Or concrete tiles that will be used

Choose a blog style and type. Or concrete tiles that will be used

Prepare the site area
Clear the area where the grass and weeds will be installed.

Place the edge of the stone rock dura
Arrange the edge of the stone rock. According to the designated area To prevent the flow of sand and the movement of floor coverings.

Slap the soil tightly.
Slap the soil tightly in the area. With soil compactor

Laying synthetic fiber sand
Laying synthetic fiber sand Or plastic sheet To prevent subsidence

Garnish with coarse sand to adjust the skin level. And compacted
Use coarse sand to apply a fine surface to the backing. And slapping the soil tightly To adjust the level evenly. By using the water level gauge And tendons in stretching to check the distance And determine the slope direction of the water

Laying concrete blocks for flooring
Laying blocks or concrete floor tiles According to the pattern designed to level off Until full area And cutting tiles or blocks with specific cutting tools In the edge of the area.

Garnish with coarse sand on the crabbed area again.
Sprinkle the surface with coarse sand again onto the floor coverings. And slap all the surface of the block to chase the sand into the joints between the blocks tightly.

Apply sand binder And apply the coating on the block surface

Cleansing By using a broom to sweep away excess sand on the skin of the chest to be clean and tidy Then applied the sand binder to the surface of the block Which the sand binder will help the sand between each block not to leak out in a short time Once dry, we can apply another layer of block coating. To help the skin to look beautiful and fresh And extend the life of the color block for longer

It can be seen that the best way to slow down the collapse of concrete blocks or paving blocks is installation under the complete and correct steps And with a quick installation procedure and can also be dismantled Making flooring blocks suitable as an alternative for jobs that do not want to make concrete castings. As saving more time and money, such as large road or walkway area, which is not worth the supporting structure Or areas that are frequently collapsed or collapsed Which, if cast, the concrete floor may be broken until it has to be demolished and then poured again on a regular basis etc.