Floating dock kit assembly with Aluminum frame and floating barrel

Posted by Bamsy on June 23rd, 2021

I need a new floating dock or want to add it to an existing dock, but I'm running out of funds. Build your own dock and save 50% on the cost of your new dock. The cost of the completed dock includes:

• Manufacturing costs for dock parts.
• The cost of transporting dock parts to their final location.
• The cost of assembling parts into the finished dock.

 Visit here: who is the most vulnerable to air pollution?

Looking at the cost of building your own dock, it's only your time, so you can easily guess that the assembly cost is $ 0. However, three days after the dock assembly goes wrong, you should choose the dock parts a little more carefully. This article will walk you through the process of assembling the various floating dock construction options and hopefully save you a bit of time and stress in building your own floating dock.

Welded steel or welded aluminum frame with custom float

When assembling a dock kit with a galvanized steel frame and a custom float, everything may ship from the same manufacturer. Frames can weigh up to 300 lbs and floats can weigh up to 110 lbs, so unless you have a forklift, you need to make sure that all your companions are waiting when the cargo truck arrives.

In the final assembly, the sum of all bolted and screwed parts is weighed, so keep the parts as close to water as possible. Once assembled, drag / carry the dock from the beach into the water. You can check out floating docks from https://www.poralu.com/en/products/floating-docks/. It is important to remember that the steel of the dock frame is protected by a zinc layer that is applied after all holes have been drilled and the dock has been completely welded. This layer is usually applied in a process known as "hot dip galvanizing". New holes in the galvanized frame are not protected and will rust. Deck is usually installed by first bolting a pressure-treated board to which the deck can be screwed.

Pressure treated wood frame with custom float

When assembling a dock kit fringed with pressure treated wood, dock kit companies usually offer hardware kits and custom floats. The hardware kit includes galvanized steel brackets and all the bolts and screws needed to bolt the lumber frame and float together. They also provide a timber list, which is up to you to order timber. When building a 20x8 foot floating dock, a typical timber list includes:

• 2x8x20'major wood, quantity = 5

• 2x8x 8'Dock end, quantity = 2

• 2x6x 8'Dock Deck, Quantity = 42

The main timber is likely not in stock and must be specially ordered at the local lumber yard. In fact, you may find that your best price is to specially order all the timber and have it delivered on the same truck.

The 20x8 foot dock described here is even heavier than a dock with a welded steel frame. To make matters worse, the frame should be assembled in as flat an area as possible. The finished dock can be farther from the lake than a steel or aluminum frame dock, so to launch the dock, surround it with all your friends and neighbors and walk the beach to the water. is needed.

Aluminum "bolt-integrated" frame and 55-gallon poly drum

Aluminum is lightweight and parts can be split into several smaller packages, eliminating the need for the military to unload the aluminum dock kit during delivery. Some aluminum dock kits use stainless steel fasteners. There is an electrolysis effect between stainless steel and aluminum, which corrodes the aluminum into a white powder. This is important in the presence of salt. Even the Columbia River in the Pacific Northwest contains enough salt to show significant corrosion between stainless steel and aluminum after just one season in the water.

The better aluminum frame dock kit uses 2024 aluminum bolts that have been anodized for added corrosion resistance. Aluminum bolts allow the dock to last longer in all environments, including the ocean.