protection instructions for a locksmith

Posted by missaifahmed on November 12th, 2022

I. General safety requirements

• The persons who have passed as an independent work as a locksmith are allowed:
• induction training;
• Fire safety briefing;
• Primary briefing at the workplace;
• Training in safe methods and labor techniques for at least 10 watch program (for work, to which increased safety requirements - 20 watch program are presented);
• Instruction for electrical safety at the workplace.
• To fulfill the duties of a locksmith-collar of buses, persons are allowed,
• trained in a special program and have a certificate of assignment to them
• qualifications that do not have medical contraindications for this profession.

Bus fur locksmith should take place: Repeated labor safety instruction at the workplace at least every three months; Unscheduled briefing: when changing the process or rules for labor protection, replacing or modernizing production equipment, devices and tools, changing conditions and organizing labor, in violations of labor protection instructions, breaks in more than 60 calendar days (for work, work, to which increased safety requirements - 30 calendar days are presented); Dispensary medical examination - annually.

Busman locksmith is obliged:

• Follow the requirements of this Instruction, instructions on fire safety measures, electrical safety instructions;
• Follow the operation of equipment;
• Use as intended and careful about the issued personal protective equipment.

2. Safety of security before starting work

Make sure and put on special clothes in good condition, fasten it on all the buttons, remove the hair under a headdress. Check whether the passages and workplace are closed by extraneous items. Make sure that the workplace is quite illuminated and the light will not blind the eyes. Local lighting voltage should not exceed , and portable electric lamps. Check the tool and adaptation necessary for work and make sure of their serviceability. Remove the faulty tool and device from the workplace. The working tool should be transferred in a special bag or box. To get acquainted with the upcoming work, think over the order of its implementation.